AVGear AVG-UDATP4, User Manual

Page: 8 / 22

AVG-UDATP4
No. Name Description
①
HDMI INPUT Connects with an HDMI source device such as DVD/ Blu-ray
②
OUTPUTS
HDMI: Connect to a HDMI display or cascade HDMI AV
signal to other displays by connecting to the HDMI INPUT
port of the other AVG-UDATP4
HDBT: HDBaseT output ports with PoC, 4 in total, connect
with IR receivers to transmit HDMI signal
③
IR
IN: Connect with IR Receiver to receive IR signal from IR
Emitter.
LOOP: Cascade IR control signal to another HDBT Splitter by
connecting to its IR IN socket
OUT: Connect with IR emitter to emit the IR signal received
from the receiver side.
④
ID PRESET
Assign ID for the AVG-UDATP4 to identify every unit, the
value may vary from 0~F.
After assigning ID, restart th eAVG-UDATP4 for stable
performance.
⑤
RS232
IN: connect with control device through 3-pin captive cable
LOOP: cascade RS232 control signal to another splitter by
connecting to its RS232 IN port
Note: Please set the communication protocol parameters
correctly, and refer to RS232 commands referring to
instructions in 3.6 RS232 Control.
⑥
EDID DIP
Switchers
4-pin EDID DIP switchers, “1” stands for “On”, “0” stands for
4-pin EDID DIP switchers, “1” stands for “On”, “0” stands for
“Off”. Dial the switches to change EDID data referring to the
explanations in 4.3 EDID Management.
⑦
DC 24V
Plug a 24V DC power adapter into this socket and tighten the
screw.
Note: Pictures shown in this manual are for reference only