AVGear AVG-UDATP4, User Manual

Page: 5 / 22

AVG-UDATP4
1. Introduction
1.1. Introduction to the AVG-UDATP4
The AVG-UDATP4 is an HDBaseT Splitter accepting 1 HDMI input and distributing it
to 4 HDBaseT outputs, plus 1 HDMI local output. The HDMI output socket can be
used to monitor local devices or cascade with an additional splitter.
Th eAVG-UDATP4 allows uncompressed 4K (max) HDMI, IR, and RS232 signals to
be transmitted over a single CAT5e/6/7 cable. It supports transmission of 4K signals
up to 40m and 1080p signals up to 60m. If required, use the HDMI local output to
cascade the HDMI signal up to 4 times with additional AVG-UDATP4.
The AVG-UDATP4 is also capable of bi-directional IR transmission, EDID
management and PoC.
The AVG-HD402PR HDBaseT receivers are recommended to utilize the full
functionality of the HDBaseT outputs of this device.
1.2. Features
Compliant with HDMI 1.4 & 3D
Transmit 4K x 2K signals up to 40m and 1080p signal up to 60m
Supports PoC
Supports IR control and cascade control
Supports RS232 control and cascade control
Real-time display of working status via LED indicators
Supports EDID configuration, 5 types in total
Supports cascading via HDMI OUT, IR Loop and RS232 Loop