AVG-TMX44PRO
5.3.6 RS232 Communication Commands
Note
:
Please disconnect all the cat cables before sending command EDIDUpgrade[X].
In the below commands, “[” and “]” are symbols for easy reading and do not need
to be typed in the actual string.
Please remember to end the commands with the ending symbols “.” and “;”.
Type the command carefully, it is case-sensitive.
Baud rate: 9600 Data bit: 8
Stop bit: 1
Parity bit: none
Command
Function
Feedback
Example
System Commands
/*Type;
Queries the models information.
TMX44PRO
/%Lock;
Lock the front panel buttons on the
Matrix.
System Locked!
/%Unlock;
Unlock the front panel buttons on the
Matrix.
System Unlock!
/^Version;
Query the version of firmware
VX.X.X
Demo.
Switch to the “demo” mode, convert
input and output in turn like1B1, 1B2,
…4B3, 4B4, 1B1… and so on .The
switching interval is 2 seconds.
Demo Mode
AV:01->01
IR:01->01
AV:01->02
IR:01->02
……
AV:04->04
IR:04->04
……
Undo.
To cancel the previous operation.
Undo Ok!
Out 01 02 03 04
In 01 01 01 01
Operation Commands
[x]All.
Transfer signals from the input channel
[x] to all output channels
X To All. (X=01~04)
All#.
Transfer all input signals to the
corresponding
output
channels
respectively like 1->1, 2->2
…
All Through.
All$.
Switch off all the output channels.
All Closed.
[x]#.
Transfer signals from the input channel
[x] to the output channel [x].
X Through.
(X=01~04)
[x]$.
Switch off the output channel [x].
X Closed.
(X=01~04)
[x]@.
Switch on the output channel [x].
X Open.
(X=01~04)
All@.
Switch on all output channels.
All Open.
