AVG-TMX44PRO
5.2 IR Control
By using IR & HDBaseT transmission technology, the AVG-TMX44PRO has the
following functions:
Control a far-end output device from the local matrix location.
Control a local input/output device from a remote location.
Control the AVG-TMX44PRO locally or remotely.
5.2.1 IR Remote Operation
1. Standby button, press it to enter/exit standby mode
2.
INPUTS:
Input channels, range from 1~4 (buttons 5~8 are not
available), corresponding IR signal switched
synchronously when switching input channels.
3.
OUTPUTS:
Output channel selection buttons. (buttons 5~8 are
not available)
4. Menu buttons: ALL, EDID, CLEAR and ENTER
.
ALL
: Select all outputs.
EDID
: Enable input port to manually capture and
learn the EDID data of the output devices.
CLEAR
: Cancel an operation like switching,
learning EDID data before it comes into effect. The
matrix will return to the previous state.
ENTER
: Confirm operation.
Note:
With this IR remote, the AVG-TMX44PRO can be controlled by the built-in IR,
the extended IR recei
ver connected to the “IR CONTROL” or ”COMMON IR” and the
IR receiver on the far-end receiver.
To switch one input to an output:
Example: Input 1 to Output 3
→ Press INPUT 1 + OUTPUT 3 + ENTER
INPUTS
OUTPUTS
MENU
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
ALL
EDID
CLEAR
ENTER
1
2
3
4
