AVGear AVG-TMX44PRO, User Manual

Page: 24 / 38

AVG-TMX44PRO
Command Function
Feedback
Example
[x1]V[x2].
Transfer the AV signal from the input
channel [x1] to one or several output
channels
([x2], separate output
channels with comma).
AV: X1-> X2
(X1/X2=01~04)
[x1]B[x2].
Transfer the AV and IR signal from
input channel [x1] to one or several
output channels ([x2], separate output
channels with comma).
AV: X1-> X2
(X1/X2=01~04)
[x1]R[x2].
Transfer the IR signal from output [x1]
to input [x2]. IR: X1-> X2(X1
、
X2=01~04)
Status[x].
Check the I/O connection status of
output [x]
AV: Y-> X
(X=01~04,
Y=01~04)
Status.
Query the input channel to the output
channels one by one.
AV: 01->01
……
AV: 04->04
IR: 01->01
……
IR: 04->04
Save[Y].
Save the present operation to the
preset command [Y], ranges from 0 to
9.
Save To FY
(Y=0-9)
Recall[Y]. Recall the preset command [Y].
Recall From FY
(Y=0-9)
Clear[Y]. Clear the preset command [Y].
Clear FY
(Y=0-9)
PWON. Work in normal mode. PWON
PWOFF.
Enter into standby mode and cut off the
power supply to HDBaseT receivers.
PWOFF
STANDBY.
Enter into standby mode. (Do not cut
off the power supply to HDBaseT
receivers, press other buttons or send
other commands to start.)
STANDBY
/%[Y]/[X]:[Z].
HDCP management command.
[Y] is for input (value: I) or output
(value: O); [X] is the number of the port,
if the value of X is ALL, it means all
ports; [Z] is for HDCP compliant status,
the value may be 1 (HDCP compliant)
or 0 (not HDCP compliant).
/%[Y]/[X]:[Z].
DigitAudioON[x].
Enable HDMI audio output of port x.

X=1, 2, 3, 4, enable this port.
 X=5, enable all the 4 ports.
DigitAudio ON with
[x]
DigitAudioOFF[x].
Disable HDMI audio output of port x.

X=1, 2, 3, 4, disable this port.
 X=5, disable all the 4 ports.
DigitAudio OFF with
[x]