A V G 9 I nternet Sec urity © 2 0 1 0 C opyright A V G T ec hnologies C Z, s .r.o. A ll rights res erved.
6 9
8.13. Resident Shield
8.13.1. Resident Shield Principles
The
Resident Shield
component gives your computer continuous protection. It scans
every single file that is being opened, saved, or copied, and guards the system areas
of the computer. When
Resident Shield
discovers a virus in a file that is accessed, it
stops the operation currently being performed and does not allow the virus to activate
itself. Normally, you do not even notice the process, as it runs "in the background",
and you only get notified when threats are found; at the same time,
Resident Shield
blocks activation of the threat and removes it.
Resident Shield
is being loaded in the
memory of your computer during system startup.
Warning: Resident Shield is loaded in the memory of your computer during
startup, and it is vital that you keep it switched on at all times!
8.13.2. Resident Shield Interface
Besides an overview of the most important statistical data and the information on the
component's current status (
Resident Shield is active and fully functional
), the
Resident Shield
interface offers some elementary component settings options, too.
The statistics is as follows:
·
Resident Shield has been running for
- provides the time since the latest
component's launch
·
Threats detected and blocked
- number of detected infections that were
prevented from being run/opened (
if needed, this value can be reset; e.g. for
statistic purposes - Reset value
)
