background image

5

QC-3265 Checkweigher User’s Manual

Under Range Capacity

Temperature Range

Humidity

Scale Capacity and Division

Options

The scale displays weights in the negative direction using the same restric-

tions as for over-range, but further limited by the number of display digits

available.

-10 to 40°C (14 to 104°F)

-30 to 60°C (-22 to 140°F) with reduced accuracy

Up to 100% relative humidity.

Pounds

Ounces

Kilograms

Grams

6 x .002

100 x .05

3 x .001

3000 x 1

6 x .001

100 x .02

3 x .0005

3000 x .5

*

12 x .005

200 x 0.1

6 x .002

6000 x 2

12 x .002

200 x 0.05

6 x .001

6000 x 1

30 x .01

480 x 0.2

15 x .005

15000 x 5

30 x .005

480 x 0.1

15 x .002

15000 x 2

60 x .02

960 x 0.5

30 x .01

30000 x 10

60 x .01

960 x 0.2

30 x .005

30000 x 5

100 x .05

1600 x 0.5

45 x .02

45000 x 20

100 x .02

1600 x 0.2

45 x .01

45000 x 10

200 x .1

3200 x 1

90 x .05

90000 x 50

200 x .05

3200 x .5

90 x .02

90000 x 20

* = default

• LCD & LED versions

• 230 VAC 50/60 Hz power

• Tower mounted toggle switch for setting target weight and zeroing

• Battery and charger (available with LCD version only)

• RS-232 or RS-485 interface board

• Short and extended towers

• Remote head

• NTEP load cells

Summary of Contents for QC-3265
















Reviews: