4
QC-3265 Checkweigher User’s Manual
Specifications
7 segment LCD, 6 digits, 0.7 inch high with 5 decimal points
7 segment LED, 6 digits, 0.6 inch high with 5 decimal points
8 LEDs for the following functions:
OVER
- yellow
ACCEPT
- green
UNDER
- red
lb
- red
kg
- red
oz
- red
g
- red
Center of Zero
- green
60 Hz. Delta-Sigma type converter
4,718,592 counts per mV/V per second
Voltage : 6 volts DC (LCD), 10 volts DC (LED)
Available Current: 69 mA (four 350 ohm load cells) LCD
114 mA (four 350 ohm load cells) LED
*
115 VAC +10% to -15% @ 0.10 Amp maximum
230 VAC +10% to -15% @ 0.05 Amp maximum
12 VDC (10 to 15 volts) @ 80 mA with 1 load cell
@ 131 mA with 4 load cells
Available for LCD version only. 30 Hour battery life. 14 hour recharge time. Low
battery warning. Low power shutoff. Charging can occur during AC operation.
Handbook 44 for 6,000 divisions (-10 to 40°C)
-10 to 40°C
-30 to 60°C
Zero:
±.085
µ
V/°C
±0.17
µ
V/°C
Span: ±5.0 ppm/°C
±10 ppm/°C
(For scale base, 3000 divisions)
±0.005% of capacity, maximum (For base, ±0.01%)
±0.005% of capacity, maximum (For base, ±0.01%)
0.005% of capacity, maximum (For base, 0.01%)
All calibration and programming is done through the front panel with data
stored in nonvolatile memory.
1, 2, 5, or 10
*
times per second
1
*
, 2, 5, or 10 display intervals
±1%, ±2%, ±5%, ±10%, ±20%, ±50%, ±100%
*
of Capacity
d = 1 displayed division
±0.25 d, ±0.5 d, ±0.6 d, ±1 d
*
, ±2 d, ±3 d, ±5 d
d = 1 displayed division
Window:
±0.25 d, ±0.5 d, ±0.6 d
*
, ±1 d, ±2 d, ±3, ±5 d,
Rate:
0.1 division per second
Starting Delay: 2 seconds
The scale displays weights up to capacity plus 9 divisions, referenced from
the zero value determined by zero setting point, or 105% of capacity,
referenced from the deadload.
Display
Light Emitting Diodes
A/D Conversion Rate
Internal Resolution
Excitation for Load Cells
Power Requirements
Battery Information
Accuracy
Linearity
Repeatability
Hystersis
Calibration and Programming
Display Rates
Filtering
Push Button Zero Range
Motion Detection Window
Automatic Zero Tracking
Over Range Capacity
LCD only
* = default
