9
If the scale has been installed between concrete approach slabs, the
customer may anchor the module using the existing holes in the corner base
plates for 1" anchor bolts. RED HEAD and WEJ-IT are two brand names of
expansion anchor bolts but neither are endorsed by Weigh-Tronix, Inc.
Properly install the scale module on an adequate foundation.
Drill a 1" hole, a minimum of 7" deep, in concrete and anchor the scale
module using adequate chemical or epoxy held anchors.
Part
Part Number
S.S.Junction box
C138736
Weigh bar 15' std. cable
271 73-0046
Weigh bar 50' std. cable
271 73-0053
Weigh bar 15' S.S. sheathed cable
27173-0061
Weigh bar 50' S.S. sheathed cable
27173-0079
50' home run std. cable
(1) 7 pin male connector
47662-0034
(2) 7 pin male connectors
13644-0021
50' home run S.S. sheathed cable
(1) 7 pin male connector
52245-0014
(2) 7 pin male connectors
52246-0013
Link
271 71-0014
Pin
26753-0012
24" ground strap
1C00739
40" ground strap
1C01632
Ground strap connector
Protective, nonconductive silicone grease
Electrical Insulating Compound DC4
1C01642
Installation On Concrete Pads With Concrete Approaches
Spare Parts List
Equipement List:
• Rotary hammer drill
• 24” driver pipe for anchor
bolts
• 24” x 2” masonary bit for
anchor bolts