B240 Counting Scale User Instructions
35
Zero Calibration
Touch this to perform the zero point calibration.
Linearity Calibration
Touch this to perform a linearity calibration.
Trim
Touch this to calibrate by using known calibration value.
Calibration Data
Touch this to check the last calibration data.
Corner Trim
Touch this to check each corner for weight difference.
Internal Count
Touch this to view internal counts.
4.3.6 Communications
Touch this item to see and set the following communication parameters.
Build-in Com
N/A
Com1
Touch this to set RS232 serial port communication.
Com2
Touch this to set RS232/422/485 port communication.
TTC Server Setting
N/A
Data Transfer Mode
For Data Transferring through Ethernet Communication
Continue
: Continues data transmission
ASK
: PC command Operation; commands are
T
: Tare Operation
Z
: Zero Operation
W
: Get weighing data
Save Mode
: Get recording data when you click
SAVE
from the HOME display.
“Sr.No, Product name, Weight, Quantity” Data will be sent
to PC.
This function works only when it’s connected to the
Ethernet. And the hyper terminal port number should be
10251
eth0
Touch this to set Wifi Communication parameters.
This function will be enabled only when it’s connected to
Wi-FI hardware.
4.4 Mode key
Touch the
Mode
key to select for the following operation & printing options.
4.4.1 Save Only Check Weight Ok:
This allows you to save weighing records only when the check weighing range is in the
OK range.
