B240 Counting Scale User Instructions
19
3.3.4 Clearing a tare
To clear a tare, remove all weight from the scale and press the
TARE
key. This works
for pushbutton tares, entered tares and preset tares.
To clear a tare from one of the pre-set tares, press and hold the
Tx
key until the entry
screen appears and enter a new tare or 0 to replace the old value.
3.4 Changing unit of measure
1.
To change the unit of measure, press the
SETUP
key,
.
The setup menu appears, shown below:
2.
Press the
UNIT
key.
A popup list of units appears.
3.
Touch the unit you want and the main screen returns with the unit of measure
active.
3.5 Basic sampling and counting
This section gives you the basics on sampling parts for counting operations,
accumulating, viewing and clearing count totals and doing check counting.
3.5.1 Sampling parts
To count parts you must first establish the individual piece weight for the parts you want
to count. You can weigh a known number of parts to establish the piece weight or enter
in a known piece weight manually.
