
14
Operating the Front Panel
1. Panel General Description
ST9500 panel consists of a digital display with blue backlight and white fore-colored letters
and 5 membrane buttons for changing parameter settings. The 5 buttons are numbered as 1, 2, 3,
4 and 5, and their marks in the buttons are named as SPEED, INTERVAL, MODE, COUNT
/RESET and SAVE.
2. Display Functions: Each line displays 16 letters (or digits)
Position I in first line (e.g. 0.25S): This indicates the cycle speed. The range is from
0.25 second/cycle to 0.6 second/cycle. Speeds are 0.25s, 0.28s, 0.30s, 0.32s, 0.35s,
0.40s, 0.45s, 050s, 0.55s, and 0.60s.
Position II in first line (e.g. 0.8s): This indicates the interval time between the beginning
of one cycle and the next in Continuous Cycle Mode or multiple. This value ranges from
0.0 second to 1.0 second in increments of 0.1 seconds.
Position III in first line (e.g. C_): This indicates the Cycle Mode. The values may be 1
through 10 and C_. If the value is 1, it means the machine will run 1 cycle at a press of
foot switch, and likewise, 2 for 2 cycles per press, 3 for 3 cycles per press… while if the
value is C_, it means the machine will keep running after you press of foot switch and
stops if you press it again.
Position in second line (e.g. Count: 13,000): This line can display the values of two
different counters. One counter can be reset, while another cannot be reset but it records
the accumulated cycles all through its lifetime. “COUNTER:” means the counter that
can be reset and “LIFE” means the counter that cannot be reset. Both counters can count
and display up to 12 digits up to 999,999,999,999 and it will begin from 0 when it is
greater than this quantity.
3. Button Functions:
Membrane buttons are used to change the parameters displayed in the panel when the
parameter setting function is activated.
Button “1” (“SPEED”): This is to change the cycle speed. With each press the display
will change to the next value of “…, 0.25s, 0.28s, 0.30s, 0.32s, 0.35s, 0.40s, 0.45s, 050s,
Summary of Contents for ST9500
