Avery Dennison Monarch Pathfinder 6059, System Administrator Manual

Page: 22 / 40

3-10 System Administrator’s Guide
Classification: Avery Dennison – Public
Configuring Data Matrix Bar Codes
Data Matrix (ECC-200) is a two-dimensional bar code which is made up of square modules
arranged within a perimeter finder pattern. There are 24 square symbol sizes available ranging
from 10 rows by 10 columns to 144 rows by 144 columns. There are six rectangular symbol
sizes available ranging from 8 rows by 8 columns to 16 rows by 48 columns. The symbol size is
data dependent. Use the
Printer Setup Application to configure the Data Matrix bar code
scanner options below.
Select To
Enabled Allows the scanner to scan Data Matrix bar codes.
Inverse Data
Matrix Allows the scanner to scan Regular, Inverse (light images on a dark
background), or Auto Data Matrix bar codes.
Mirrored Data
Matrix Allows the scanner to scan mirrored (never, always, or auto) Data
Matrix bar codes.
Configuring QR Code Ba r Codes
QR (Quick Response) Code is a two-dimensional bar code, which is made up of square modules
arranged in an overall square pattern. A unique finder pattern is located at three corners of the
symbol. Four levels of error correction are available, along with a wide range of symbol sizes.
Use the
Printer Setup Application to configure the QR Code bar code scanner options below.
Select To
Enabled Allows the scanner to scan QR Code bar codes.
Micro QR Code Allows the scanner to scan Micro QR Code bar codes.
Inverse QR
Code Allows the scanner to scan Regular, Inverse (light images on a dark
background), or Auto QR Code bar codes.
P e r f o rm i n g a S ca n n e r T e s t
Scan a particular barcode. The barcode data is displayed.
T e st C u r r en t S e t t i n g s
Tests current scanner settings.
T e st A l l B a r co d es
Test all barcodes.
R e s e t t i n g t h e S ca n n e r t o D ef au l t s
Resets all scanner values to their defaults. For example, any changes made to general scanner
settings (aim duration, bi-directional redundancy, etc.) are reset to defaults. Changes made to
specific bar codes are also disabled/set to their defaults.