Using a Web Browser
4-13
SNMP IP Traps
You can configure the SNMP IP traps.
1.
From the Alerts and Traps page, click
SNMP IP Traps
.
2.
Enter a community name, IP address, and the trigger conditions for an
email alert. You can enter up to eight IP addresses.
Note:
The S1 port acts as a toggle switch to enable or disable the alerts.
You must select S1 to enable the alerts.
3.
Click
Submit
.
4.
Click the reset link at the bottom of the screen. The Reset Server screen
appears.
5.
Click
Submit
and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until
you reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
Summary of Contents for Monarch 9493 SNP
