2-26
System Administrator’s Guide
Setting the Escape Character
This option allows you to set or view the Escape Character (EC).
Run-time messages from the radio begin with the EC and the default is the
pound sign (#), which has a
hex value of 23. You may need to change the
default EC character if it conflicts with other data, because unexpected
operation could occur.
1.
From the Configure menu, select
Escape Char
.
2.
Press
D
or
U
to decrease or increase the decimal value.
3.
Press
L
or
R
when you are finished. Press
e
to save the setting or
X
to exit without saving changes. You return to the Configure menu.
The radio is now configured. Press
E
until you return to the Pause screen.
Printing a Network Information Label
You can print a network information label with the device name, IP address,
and MAC address as a Code 128 bar code. You can also print the network
information as a Code 39 bar code with the correct MIF settings.
1.
Turn on the printer.
2.
Press
M
or
n
. You see the printer’s IP address. For example,
3.
Press to print a network information label.
Sample Label
Summary of Contents for Monarch 9493 SNP
