18
2.2 U
NPACKING
,
ASSEMBLING
AND
CONNECTING
THE
MACHINE
ALS
104
2.2.4
Attaching the dispensing edge
L-shaped dispensing edge
Tools:
– 8 mm hexagon socket driver
Both the dispensing edge holder [13D] and the mount-
ing flange on the machine casing have two concentric
rings of holes [13B] on the connecting surfaces. Two
pins [13C] that fit into these holes are provided with the
dispensing edge holder. To secure the dispensing edge
holder so it cannot swivel, the pins are located in dia-
metrically opposite holes. By replacing the pins in adja-
cent holes, the mounting angle of dispensing head
holder can be adjusted in 15° increments [14].
Locate the pins in diametrically opposite holes.
– Choose either inner or outer circle of holes, depend-
ent on angle required.
Fit the dispensing edge holder onto the pins at the
required angled.
Fix the dispensing edge holder in place with
screw [13A].
[12] Dispensing edge holder with dispensing edge.
[13] Attaching the dispensing edge holder (D).
[14] The mounting of the dispensing edge holder assembly can
be adjusted in 15° gradations as required
D
C
A
B
Summary of Contents for ALS 104
Page 1: ...ALS 104 INSTALLATION MANUAL Labeller Release no 1 4 2013...
Page 2: ......
Page 35: ......