![background image](http://html1.mh-extra.com/html/avery-dennison/als-104/als-104_installation-manual_3030478023.webp)
21
2.2 U
NPACKING
,
ASSEMBLING
AND
CONNECTING
THE
MACHINE
ALS
104
Setting power supply voltage
The ALS 104 is designed for use with 230 V (AC)
or with 115 V (AC).
Adjusting the machine for the alternative supply volt-
age:
Switch off the machine. Unplug the power supply
cable.
Remove the fuse holder from the power switch unit.
To do this, push the latch [20A] upwards and pull the
holder [20B] outwards.
Remove the fuses [21B] from the holder.
Pull voltage insert [21A] out of fuse holder.
Turn the voltage insert so that the required voltage
can be seen in the window of the fuse holder.
Slot voltage insert back into fuse holder.
Slot fuse holder back into power switch unit.
It is
not
necessary to change the type of fuse
when the supply voltage is changed.
– Fuse type required: See “Replace fuses” on
page 38.
Check whether the correct voltage appears in the
window of the fuse holder [23A].
[20] Removing the fuse holder.
A
B
[21] Setting power supply voltage
A
Voltage insert
B
Fuses
A
A
B
[22] Voltage display in the fuse holder (here showing 230 V).
A
Summary of Contents for ALS 104
Page 1: ...ALS 104 INSTALLATION MANUAL Labeller Release no 1 4 2013...
Page 2: ......
Page 35: ......