European Community Compliance Statement
Class B
This product is herewith confirmed to
comply with the requirements set out in the
Council Directives on the Approximation of
the laws of the Member States relating to
Electromagnetic Compatibility Directive
2004/108/EC.
Disclaimer
All the screen shots in this documentation are only example images.
The images may vary depending on the product and software version.
Information presented in this documentation has been carefully checked
for reliability; however, no responsibility is assumed for inaccuracies.
The information contained in this documentation is subject to change
without notice.
Copyright
©2010 by AVerMedia Technologies, Inc. All rights reserved.
No part of this document may be reproduced or transmitted in any form,
or by any means without the prior written permission of AVerMedia
Technologies Inc. AVerMedia Technologies Inc. reserves the right to
modify its models, including their characteristics, specifications,
accessories and any other information stated herein without notice. The
official printout of any information shall prevail should there be any
discrepancy between the information contained herein and the
information contained in that printout.
"AVerMedia" is a trademark (or registered trademark) of AVerMedia
Technologies, Inc. Other trademarks used herein for description
purpose only belong to each of their companies.
The mark of crossed-out wheeled bin indicates that this product must not be disposed of with your other household waste. Instead, you
need to dispose of the waste equipment by handing it over to a designated collection point for the recycling of waste electrical and
electronic equipment. For more information about where to drop off your waste equipment for recycling, please contact your household
waste disposal service or the shop where you purchased the product.
IMPORTANT SAFETY INSTRUCTIONS
z
Read Instructions - Read all the safety and operating instructions before connecting and operating your TV tuner to help ensure your own personal safety
and to protect your product from potential damage.
z
Retain Instructions - Retain all the safety and operating instructions for future reference.
z
Heed Warnings - Adhere to all warnings on the product and the operating instructions.
z
Grounding - For continued protection against risk of electric shock and fire, this accessory should be installed/connected only to the products, such as a
computer, equipped with a three-wire grounding plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This
is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace the obsolete outlet. Do not defeat the safety
purpose of the grounding-type plug.
z
Lightning - For added protection and to prevent damage due to lightning and power-line surges, unplug the host system, such as a computer, from the
wall power outlet and disconnect the antenna or cable system. Unplug the host system from the wall power outlet when left unattended or unused for
long periods of time.
z
Never insert anything metallic into the TV tuner openings. Doing so may create the danger of electric shock.
z
Openings in the TV tuner cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Avoid using the
TV tuner on a bed, sofa, rug, or other soft surface, as doing so may block the ventilation openings in the cabinet. If you place the TV tuner in a bookcase
or an enclosed space, be sure to provide adequate ventilation and air flow.
z
Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other light or power circuits, or where it can fall
into such power lines or circuits.
z
Antenna Installation - When installing an outside antenna system, extreme care should be taken to prevent it from touching such power lines or circuits,
as contact with them may be fatal.
z
Outdoor Antenna Grounding - If an outside antenna is connected to the product, ensure that the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges. Article 810.21 of the National Electric Code, ANSI/NFPA No.70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to the antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection of grounding electrodes, and requirements for the grounding electrode.
(for CATV system installer) This reminder is provided to call the CATV systems installer's attention to Section 820.93 of the National Electric Code,
ANSI/NFPA 70:2005 (for US/Canada) and/or EN60728-11:2005 standard (for Europe), which provide guidelines for proper grounding and, in particular,
specify that the coaxial cable shield shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
M o d e l
N o . : A 8 3 5
P / N 3 0 0 A A 8 3 5 - D G P
M a d e i n T a i w a n
