manualshive.com logo in svg

Avermedia AVerDiGi SEB3104H, User Manual, Page: 25 / 105

Share
Download
Avermedia AVerDiGi SEB3104H User Manual Download Page 25

 

19 

2.3  Familiarizing the Functions in Playback Mode 

Click 

(playback)

 button at the lower right corner of Preview mode user interface to switch to 

Playback mode.

 

 

i

 

The maximum decoding fps in D1 resolution is 60 fps. The playback speed is default in 1/2x when 
display in QUAD mode. In one channel display mode, the playback speed is in 1x (normal speed). 

 

Name 

Function 

(1) Status 

Display the recorded date, time and play speed. 

(2) Playback 

Control Buttons 

ı

: 

Move

 

at the beginning of the recorded video file. 

ı

:

 Go back to the previous frame. 

: 

To reduce the playback speed. When each time press

, the speed will reduce 

1/2 from original speed (16X, 8X, 4X, 2X, 1X, 1/2X, 1/4X, 1/8X, 1/16X). 

: 

Wind back the recorded video file. 

: 

Briefly stop playing the recorded video file.

 

:

 Play the recorded video file. Back to 1X playback speed when playback speed at 

faster or slower speed 

: 

To faster playback speed. When each time press 

, the speed will double the 

playback speed (1/16X,1/8X, 1/4X, 1/2X, 1X, 2X, 4X, 8X, 16X). 

ı

: 

Go to the next frame. 

ı

:

 

Go to the end of the recorded video file. 

(3) Split Screen 

Mode 

Select from 2 different split screen type to playback the recorded video file of all the 
camera, or one camera over the other or alongside on a single screen. 

(4) Playback menu 

To call out playback menu(see also 

Chapter 2.3.1

) 

(5) Preview 

Switch to Preview mode. 

Summary of Contents for AVerDiGi SEB3104H










































































































Reviews:

No comments