5
1.4.1 Setting Up the DVR Unit
1.4.2 Installing the Hard Disk
The DVR unit allows user to install 1 SATA hard disks inside the DVR unit.
i
For hard disk spec, please referring to
http://www.avermedia.com/AVerDiGi/Product/
→
AVerDiGi EB Series
→
AVerDiGi SEB3104H
→
Hardware Recommendations
The “compatible hard disks” indicated in the above recommendation list only means that these
commercially available hard disks were tested with AVerMedia
®
products and functioned well
under normal operation conditions. AVerMedia
®
does not guarantee or provide warranties,
explicitly, implied or statutory with respect to the reliability of the hard disk function or its
compatibility. In no event AVerMedia
®
shall be liable for damages, with respect to any business
interruption of clients, lost profits, loss of programs or other data on your information handling
system or otherwise. This includes direct, indirect, incidental, special, or consequential
damages, resulting from the incompatibility caused by the usage of these hard disks, even if
AVerMedia
®
has expressly advised about the risk of such damages. The entire risk arising out of
the use of any information attached here with is borne by the recipient.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws
2. Push the cover backward and lift
3. Secure the brackets on the hard disk
4. Connect the end of the SATA cable and the
power connector to the hard disk