Page|29
www.avenview.com
It is allowed to have different overlap pixel among projectors. “Irregular” Spread Sheet is
required to calculate the data.
Please contact dealer or factory to get necessary assistance for the Spread Sheet.
Image size for each projector: 250cm *156cm
Overlap region: 50cm
Installation distance based on throw ratio 1.1-1.7: between 300cm-425cm
Installation height: install the projector at a position with minimum keystone at both vertical
edges.
Based on the calculation data, user can easily determine the image location for each
projector.
Using laser Level tool and mark the locations for each projector with paper tape, including 4
borders and center line of the screen. The paper tape shall not damage the surface of the
screen.
7.5
Apply Spread Sheet data for projector installation and EdgePro setting
7.5.1
Installation data from Spread Sheet from previous section:
7.5.2
Mark projection region for each projector
