Page|10
www.avenview.com
C. High end 10-bit video processor
1. Integrated with 10-bit high end processor with 3D motion adaptive de-interlace, low angle
smooth algorithm and 3:2/2:2 film mode detect and recovery function.
2. Complete color adjustment function, including brightness, contrast, hue, saturation, pre-set
color temperature, independent RGB color adjustment and white balance correction.
D. Edge mask
1
Image [SHIFT] to execute edge mask up to 500 pixels following the image after geometry
adjustment and Edge [Mask] with 8 adjustment points to provide irregular edge mask up to
900 pixels in each control point.
E. Video wall function
1. Image cropping and location assignment for each projector.
2. Overlap pixel adjustments up to 1800 pixels for image position shift, bezel compensation and
creating overlap region for edge blending and aspect ratio adjustment.
3. Connect with 4k/2k input signal and split the image for display devices without additional PC,
image splitter or other devices.
4. Serve as video wall controller for irregular video wall display up to 15x15 matrix display from
single signal input source.
F. Image rotation and flip
1
Image 90/270 degrees’ rotation & flip under 4k/30Hz input. Image 0/180 degrees’ rotation
and flip supports up to 4k/60Hz input.
G. System control and other features
1. 1U housing for easy rack installation. Professional design and reliable.
2. Operation temperature: 0-45
〫
C. Relative humidity: 10%-90% non-condensing.
3. Replace high price projector with low cost projector and achieve the same functionality.
4. Full function OSD by IR remote controller.
5. Full function system setup through USB, WebGUI or Ethernet (Including through WiFi by
Mobile or iPad)
6. Firmware update via USB or Ethernet.
7. Windows PC tool can control multiple processors simultaneously through USB or Ethernet.
8. Internal grid pattern with selective pixel size, color and style for easy geometry alignment.
9. RS232 & Ethernet system control compatible with most of control system.
10. User can select blue or black background color when no input signal is detected.
11. Programmable EDID in the range at H=1024~3840, V=720~2400.
12. BOX ID and programmable IP address for convenient multiple unit control at the same time.
13. User can save up to 5 settings and can be recalled by remote controller, RS232, USB or
network.
