1.3
REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
Warning Symbols Description
ONLY USE THE PROVIDED POWER CABlE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE ELECTRICAL
PARTS. THIS MAY RESULT IN ELECTRICAL SHOCK OR BURN.
THIS WARNING SYMBOL MEANS DANGER. WHEN THIS SYMBOL IS
PLACED, YOU ARE IN AN ENVIROMENT THAT CAN CAUSE
BODILY INJURY.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL VOID THE
WARRANTY AND CONTINUED USE OF THE PRODUCT.
THE CIRCUIT BOARDS ARE VERY SENSITIVE TO STATIC
DISCHARGE. PLEASE ENSURE IF RACK MOUNTED OR INSTALLED
ON A SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Avenview is
not responsible for any radio or television interference caused by using other than recommended cables and connectors or
by unauthorized changes or modifications to this equipment.
Rev.00 12/2017
www.avenview.com
2
