www.avenview.com
4
2.1
PACKAGE CONTENTS
Before you start the installation of the HBT2-C6BOPC-SET, please ensure that the packaging has the listed items below.
1
x 1
x 1
2
POWER BRICK (12V 2A) + C7
Either Standard US power cord *
or International power cord (UK,EU,AUS)
* Based on the order request.
x 1
3
4
5
x 1
x 1
2.2
BEFORE INSTALLATION
•
Place the product on an even and stable surface. If the product falls, it may cause an injury to a person or malfunction.
•
Do not place the product in high temperatures (over 50°C), or low temperature (under 0°C) or high humidity.
•
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•
Do not twist or pull by force ends of the UTP /HDMI cable. It can cause malfunction.
HBT2-C6BPOC-S (TX)
HBT2-C6BPOC-R (RX)
QTY
QTY
QTY
PRODUCT USER MANUAL
x 1
QTY
•
Keep the device away from water. If the unit becomes wet, power off immediately.
•
Installation of the equipment must comply with local and national electrical codes.
•
Take care when connecting units to the electrical power circuit, incase the maximum rated circuit is not overloaded
ATTENTION
•
To prevent airflow restriction, allow clearance around the ventilation openings to be at least: ONE Inch (25.4 mm).
Unauthorized changes or modifications could void the user's authority to operate the equipment.
•
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents.
•
IR Blaster
3-pin Terminal Block Connector
IR Receiver
x 2
QTY
