www.avenview.com
10
RECOMMENDED
HDBaseT
T
est Guidelines
END-TO-END
TESTING
HDBaseT system, a final end-to-end test of all the A/V components should take place.
These tests include checking the HDMI stream at the far end (sink end), the clock rate,
frame compare, video pattern, audio, EDID and HDCp with Quantum 780D (recommended)
PASSIVE
MONITORING:
P
assive monitoring enables an integrator to view the HDCp transactions, EDID
exchange, as well as the connection events between the actual devices in the network.
Addional info on
Guidelines to Test & Troubleshoot HDBaseT Systems
can be retreived from our website
under the category Downloads for this product HBT
2
-C6BPOC-SET.
Readers can view the new 4K rated category cable "Belden 4K Media Cables" press release to learn more
about why a specified cable is important for delivering proper HDBaseT signals to its final destination.
SET-TOP BOx
(
NO PICTURE
)
•
HDBaseT and HDMI 1.3 standards support C
LOCK
STRETCHING for i2c buss
protocol
.
•
Example set top boxes like Scientific Atlantic results no picture. This can be resolved
by swapping out the box for a newer version that supports HDMI 1.3 not HDMI 1.2
NO INFRARED
COMMUNICATION
BETWEEN
SOURCE/DISPLAY
•
Ensure the
UTP
cable is run within the wall away from EMI and High Voltage
power
lines.
•
please check manual of device to ensure proper placement of IR Blaster on IR E
Y
E.
•
Some
L
ED /plasma TV have EMI interference with the IR receiver, please place the
IR
Rx 3-6” away from Screen
5.
GENERA
L
TRO
UBL
ESHOOTING
CHALLENGES
POSSIBLE SOLUTION
NO IMAGE
ON DISPLAY
•
Check if connection to the source and the display are correct.
•
Ensure that display device supports 480p, 720p and 1080p 4k@ 60 resolution
•
Terminated to 568B standard with Shielded Ends Recommended
•
High Quality CAT5/6 Cable helps signal transmission
•
P
lease use the supplied power supply
.
•
Check
L
ED link light see (Section
#
3
P
anel Description)
SCREEN
(DISPLAY)
ARTIFACTS
APPEAR
CHECK RESOLUTION
•
This product supports
4
80p
up to
4
K
@
6
0 resolution.
•
Check the HDMI connect
or is not bent.
•
If outputting from a
P
C. Check the maximum resolution range of the graphics card.
•
Check all connections are seated properly
to the devices.
