www.avenview.com
8
3.
IR E
X
TENDERS
IR Blaster
IR Receiver
IR Sockets
IR BLASTER:
plug in the IR blaster to
port #5/12
as shown on panel description to flash
all IR command signals
on the deivces
IR window
to control the devices
with the
IR signals
received
.
IR RECEIVER:
plug in the IR receiver to
port #4/11as shown on panel description to
receive all IR command signals from
the IR remote control
.
Wiring Configuration
of IR
(
3.5mm Jack
)
IR Blaster
IR Receiver
WARNING
NOTE: Incorrect placement of IR Blaster and IR Receiver into
the extender may result in the failure of the IR extenders.
please check carefully before plugging in the IR extender to the
respective IR sockets.
It is clearly marked
IR OUT
= IR BlASTER
IR
IN
=IR RECEIVER
WARRANT
Y
WI
LL
NOT COVER THE
DAMAGE.
