3
BEFORE INSTALLATION
ATTENTION
• To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 24 Inches (610mm).
• Unauthorized changes or modifications could void the user's authority to operate the equipment.
• Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents.
• Place the product on an even and stable surface. If the product falls, it may cause an injury to a person or malfunction.
• Do not place the product in high temperatures (over 50°C), or low temperature (under 0°C) or high humidity.
• Use the power supply with correct specifications. If inappropriate power supply is used then it may cause a fire.
• Do not twist or pull by force the ends of the UTP /HDMI cable. It can cause malfunction.
• Keep the device away from water. If the unit becomes wet, power off immediately.
• Installation of the equipment must comply with local and national electrical codes.
• Take care when connecting units to the electrical power circuit in case the maximum rated circuit is not overloaded
8
Rev.00 03/2018
www.avenview.com