Aventura DHE Series User Manual Download Page 64

Page: 64 / 97

DHE User‟s Manual

Figure 11. Host/Others Menu

Note:

The Server Port has a port range of 2000-65535 and is used for remote client software access. The HTTP port

is used for remote internet browser access.

Email

To configure E-mail settings:

Enter the Network Settings menu by clicking Menu > Setting > Network.

Select the

Advanced

tab.

Click the Set button next to

E-mail

to enter the E-mail menu. The E-mail menu is shown in Figure 12.

Figure 12. E-mail Menu

Enter e-mail settings. Please refer to Figure 12 for details.

Click the Test button to test e-mail settings.

Select

Advanced

tab to enable

Attached JPEG File

if you want to send email with alarm images, the

interval is the time of two adjacent alarm images. You can also set SMTP port and enable SSL here.

Click the OK button to save and exit the E-mail menu.

Summary of Contents for DHE Series


































































































Search results

Summary of Contents for DHE Series

Reviews:

Related manuals for DHE Series

Brands by name

Popular brands

Aventura DHE Series, User Manual

Search results

Summary of Contents for DHE Series

Reviews:

Related manuals for DHE Series

Brands by name

Popular brands