Aventura DHE Series, User Manual

Page: 63 / 97

DHE User‟s Manual
63
Figure 9. Host/Others Menu
4. Enter Alarm Host IP and Alarm Host Port . Alarm Host IP is the IP of the remote PC which has the
Network Video Surveillance software installed. The Alarm Host Port must be the same as software‟s
alarm monitor port (default port is 7200).
Configuring Multicast
Setting up multicasting solves limitation issues when streaming videos through a network access device. A multicast
address spans the Class-D IP range of 224.0.0.1 to 239.255.255.254. It is suggested that the IP address range of
239.252.0.0 to 239.255.255.254 be used.
To set up multicasting:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4. Set Multicast IP , as shown in Figure 10. When adding a device to the Network Video Surveillance
software, the multicast address must be the same as the DVR‟s multicast IP.
Figure 10. Host/Others Menu
5.
Click OK to save and exit menu.
Configuring Server and HTTP Ports
If you would like to change the server and HTTP ports from the default settings, you can do so in the Network Settings
menu. The default server port is 8000 while the default HTTP port is 80.
To change the default ports:
1. Enter the Network Settings menu by clicking Menu > Setting > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4.
Enter new Server Port and HTTP Port , as shown in Figure 11.