manualshive.com logo in svg

Avaya S8730, Maintaining Manual, Page: 60 / 64

Share
Download
Avaya S8730 Maintaining Manual Download Page 60

Number

Color

Description

1

Green

System power LED. This LED glows steadily

when the system is powered up and 12 V system

power is available. This power supply is used to

maintain the battery charge and provide

supplementary power to the cache

microcontroller.

2

Green

Auxiliary power LED. This LED glows steadily

when 3.3V auxiliary voltage is detected. The

auxiliary voltage is used to preserve Battery-

Backed Write Cache (BBWC) data and is

available any time that the system power cords

are connected to a power supply.

3

Amber

Battery health LED.

4

Green

BBWC status LED.

Related topics:

Battery pack LED patterns

 on page 60

Battery pack LED patterns

The battery health LED and Battery-Backed Write Cache (BBWC) status LED in combination

provide information about the status of the battery and information in cache.

LED indications

60     Maintaining the Avaya S8730 Server for Modular Messaging

June 2009

Summary of Contents for S8730

































































Reviews:

No comments