Avaya S8730, Maintaining Manual, Page: 17 / 64

3. Pull the server straight out of the rails and remove it from the rack.
4. Place the server on an antistatic mat.
Removing the cover from the server
1. Remove the Torx screwdriver from the rear of the server.
2. With the screwdriver, release the security screw on the latch handle.
3. Lift the latch handle up.
4. Slide the cover back, lift it straight up, and set it aside.
Replacing the server cover
1. Place the cover on the server so that the front alignment tabs are in place.
2. Push the cover latch down.
The cover slides forward and locks into place.
Removing the cover from the server
Maintaining the Avaya S8730 Server for Modular Messaging June 2009 17