Avaya P330-ML-ML, Reference Manual

Page: 73 / 320

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 59
Example:
set allowed managers
User level: privileged, supervisor.
Use the
set allowed managers
command to enables or disable the Allowed
Managers feature.
When this feature is enabled, only those stations whose IP addresses are listed in the
Allowed Managers table can access the device over Telnet, SNMP, or HTTP.
The syntax for this command is:
set allowed managers [enabled|disabled]
Example:
set allowed managers ip
User level: privileged, supervisor.
Use the
set allowed manager ip
command to add or remove an IP address
from the Allowed Managers table. The Allowed Managers table can contain up to
twenty IP addresses.
The syntax for this command is:
set allowed managers ip [add | delete][IP address]
P330-1# session 2
P330-2# session
P333T (*) In Slot 1
P334T In Slot 2
P330-2#
P330-1(super)# set allowed managers enabled
Managers are enabled
add Adds specified IP address to the Allowed Managers
table
delete Deletes specified IP address from the Allowed
Managers table
IP address IP address to be added or removed