Avaya P330-ML-ML Page 59 Reference Manual Download

Page: 59 / 320

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

Avaya

P330-ML Reference Guide

no ip ssh

User level: supervisor

Use the

no ip ssh

command to disable the SSH server.

The syntax for this command is:

no ip ssh

Example:

no ip telnet

User level: supervisor

Use the

no ip telnet

command to disable Telnet access to the device.

The syntax for this command is:

no ip telnet

Example:

no ip telnet-client

User level: supervisor

Use the

no ip telnet-client

command to disable the device from acting as a

Telnet client.

This command can only be run from the console port on the device.

The syntax for this command is:

no ip telnet-client

P330-N#

ip ssh

This will prevent future remote SSH sessions and disconnect

all active SSH sessions - do you want to continue (Y/N)? y

Shutting down all active sesssions

P330-N#

no ip telnet

This will prevent future remote telnet sessions and

disconnect all active telnet sessions - do you want to

continue (Y/N)? y

Done!

Summary of Contents for P330-ML-ML

































































































































































































































































































































Search results

Summary of Contents for P330-ML-ML

Reviews:

Related manuals for P330-ML-ML

Brands by name

Popular brands

Avaya P330-ML-ML, Reference Manual

Search results

Summary of Contents for P330-ML-ML

Reviews:

Related manuals for P330-ML-ML

Brands by name

Popular brands