Avaya P330-ML-ML, Reference Manual

Page: 296 / 320

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
280 Avaya P330-ML Reference Guide
The syntax for this command is:
[no] ip ospf hello-interval <seconds>
Example:
ip ospf priority
User level: privileged, supervisor.
Use the
ip ospf priority
command to configure interface priority used in DR
election.
Use the
no ip ospf priority
to set the OSPF priority to its default value.
The default is 1.
The syntax for this command is:
[no] ip ospf priority <priority>
Example:
ip proxy-arp
User level: privileged, supervisor.
Use the
ip proxy-arp
command to enable proxy ARP on an interface.
Use the
no ip proxy-arp
command to disable proxy ARP on an interface.
The syntax for this command is:
[no] ip proxy-arp
Example:
To disable proxy ARP on interface marketing:
seconds integer
Router-N(configure-if:marketing) # ip ospf hello-interval 5
Done!
priority integer
Router-N(configure-if:marketing) # ip ospf priority 17
Done!
Router-N(config-if:marketing)# no ip proxy arp