Chapter 2 Avaya P330-ML Layer 2 CLI Commands
86
Avaya
P330-ML Reference Guide
The syntax for this command is:
set port disable
<mod_num>/<port_num>
Example:
set port dot1x initialize
User level: supervisor
Use the
set port dot1x initialize
command to initialize port dot1x.
The syntax for this command is:
set port dot1x initialize
<module/port>
Example:
set port dot1x max-req
User level: supervisor
Use the
set port dot1x max-req
command to set the maximal number of times
the port tries to retransmit requests to the Authenticated Station before the session is
terminated.
module
Number of the switch in the stack.
port
Number of the port on the module. If you do not specify a
number, all the ports on the module are disabled.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
P330-N#
set
port
disable
4/1
Port 4/1 disabled.
module/
port
Module and port number
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
P330-1(super)#
set port dot1x initialize 2/3
port 1/2 dot1x was initialized
Summary of Contents for P330-ML-ML
