Avaya M7208 User Manual Download Page 66

Page: 66 / 90

M7208 Telephone User Guide

Page 66

- Issue 02d (25 June 2014)

IP Office

12. Phone Settings

12.1 Contrast

You can change the contrast on the phone display.

1. Press Feature *7.

2. Use the number keys to select the required contrast. Alternatively, use the

and

buttons to change the

contrast.

3. The function will automatically cancel after a 3 seconds.

12.2 Ringer Sound

You can change the ringer sound. This does not change the ring pattern which is controlled by the telephone system.

1. Press Feature *6.

2. Press 1 to 4 to select the required ringer sound.

Whilst the function is active, you can also use the

and

buttons to change the ringer volume.

3. The function will automatically cancel after a 5 seconds.

12.3 Ringer Volume

You can change the ringer volume using the following process. You can also adjust the volume while a call is ringing your
phone.

1. Press Feature *80. The phone will start a continuous ring.

2. Use the

soft and loud

volume buttons to change the volume to the level required.

3. The function will automatically cancel after a 5 seconds.

Summary of Contents for M7208



























































































Search results

Summary of Contents for M7208

Reviews:

Related manuals for M7208

Brands by name

Popular brands

Avaya M7208, User Manual

Search results

Summary of Contents for M7208

Reviews:

Related manuals for M7208

Brands by name

Popular brands