Avaya M7208 User Manual Download Page 62

Page: 62 / 90

M7208 Telephone User Guide

Page 62

- Issue 02d (25 June 2014)

IP Office

11.3 Do Not Disturb

When you are in 'do not disturb', your callers are redirected to voicemail if available or otherwise hear busy tone.

People who call from numbers in your do not disturb exceptions list can still call you. Forwarding is set is applied
to those calls.

People who use a priority call function can also call you.

Calls to any group of which you are a member are not presented to you (unless you are the last available member
of the group).

Enabling do not disturb will not affect any calls already being presented to your phone.

You can still use the phone to make outgoing calls. When you go off-hook you will hear broken dial tone.

N = No Calls (Do Not Disturb)
An N is shown on your phone's idle display when you have

do not disturb

enabled.

To Turn On Do Not Disturb

1. Press Feature 85. The phone briefly displays Do Not Distrb.

To Turn Off Do Not Disturb

1. Press Feature #85. The phone briefly displays Allow Calls.

Default Short Codes

Short codes

are numbers that you can dial from any types of phone on the telephone system. The following are

default short codes that may be available on your system.

Switch Do Not Disturb On: *08
Set your phone to do not disturb.

Switch Do Not Disturb Off: *09
Switch off do not disturb.

Add a Do Not Disturb Exception Number: *10*N#
Add a number (N) to your list of do not disturb exceptions.

Delete a Do Not Disturb Exception Number: *11*N#
Remove a number (N) from your list of do not disturb exceptions.

Cancel All Forwarding: *00
Switch off any forwarding. Includes forward unconditional, forward on busy, forward on no answer, follow me and
do not disturb.

Summary of Contents for M7208



























































































Search results

Summary of Contents for M7208

Reviews:

Related manuals for M7208

Brands by name

Popular brands

Avaya M7208, User Manual

Search results

Summary of Contents for M7208

Reviews:

Related manuals for M7208

Brands by name

Popular brands