Avaya IP Office D100 Installation And Administration Manual Download Page 58

Page: 58 / 90

icon next to

SIP DECT Base Stations

in the side menu to expand a list of base stations. You

need not navigate to the SIP DECT Base Stations status page to obtain the details for each
base station.

Note:

You might have to scroll the page or expand the window to view all of the details and options
available for that base station. You must also highlight a handset for all of the options to
become available.

The following options are available, in addition to those described for the SIP DECT Base
Stations status page:

•

Refresh

: Refreshes the Base Station Status page and the handset table.

•

Unregister Handset

: Unregisters the selected handset from the base station.

•

Reset Handset

: Resets the highlighted handset.

•

Unregister All Handsets

: Unregisters all handsets from the selected base station.

•

Reset All Handsets

: Resets all the handsets registered to the selected base station.

Administration and maintenance

58 D100 SIP Wireless Terminal Installation and Administration Guide

December 2012

Comments? [email protected]

Summary of Contents for IP Office D100



























































































Search results

Summary of Contents for IP Office D100

Reviews:

Related manuals for IP Office D100

Brands by name

Popular brands

Avaya IP Office D100, Installation And Administration Manual

Search results

Summary of Contents for IP Office D100

Reviews:

Related manuals for IP Office D100

Brands by name

Popular brands