Contents - Page 15
Installing a New System
Unpacking
Before proceeding with installation, ensure that you have read the instructions in
Preparing for Installation on page 6.
Unpacking and checking:
1. Before unpacking check for any signs of damage that has occurred during
transit. If any damage exists bring it to the attention of the carrier.
2. Check all cartons against the packing slip and ensure that you have the
correct item(s) as per the country variants (see page 43). Report any errors or
omissions to the equipment supplier.
3. While unpacking the equipment, retain all the packaging material. Fault returns
are accepted only if repackaged in the original packaging.
4. Visually inspect each item and check that all the necessary documentation and
accessory items have been included. Report any errors or omissions to the
dealer who supplied the equipment.
5. Ensure you read and understand any documentation included with any item.
An overview of the interconnections for an INDeX Media Gateway is shown on
page 16.
Installation Manual INDeX Media Gateway
Contents - Page 15
38DHB0002UKGA Issue 1 (12/05/2004)