Avaya IG550, Installing And Configuring

Page: 138 / 196

Installing an IG550 Integrated Gateway with an existing Juniper J4350/J6350 Services Router
138 Installing and Configuring the IG550 Integrated Gateway
where
<#>
is the number of rings before the modem answers.
\n
indicates the end of the
command string.
For example, type:
set interfaces umd0 modem-options init-command-string “ATS0=2\n” , where the
USB modem interface umd0 answers in 2 rings.
●
set interfaces dl <#> unit 0 ppp-options chap access-profile
<access_profile_name>
where
<#>
is the number, from 0 to 149, for the dialer and
<access_profile_name>
is
the name of the access profile that will contain a chap secret for the ppp dial-in. The
dialer can apply to incoming, outgoing, or both dialing options for communication to the
hosts listed in the profile.
For example, type:
set interfaces dl1 unit 0 ppp-options chap access-profile jtr, where the dialer is dialer
1 and the access profile name jtr to which the chap secret will be assigned.
●
set interfaces dl <#> unit 0 ppp-options chap local-name
<local-name>
where
<#>
is the number, from 0 to 149, for the dialer you identified in the previous step
and
<local-name>
is a name for use by host client computers that are outside of the
router’s domain. The dialer uses its assigned access profile to find a CHAP secret for this
host. The
<local-name>
can be the same name as the
<access_profile_name>
,
such that remote dial-in from other domains can use the same chap secrets of the
access profile.
For example, type:
set interfaces dl1 unit 0 ppp-options chap local-name jtr, where a calling host
computer from outside the router domain also uses the chap secret assigned to profile
jtr .
● set interfaces dl <#> unit 0 dialer-options pool <pool#>
where
<#>
is the number, from 0 to 149, for the dialer and
<pool_name>
is the name of
the pool and is the same pool name assigned to the umd0 interface earlier.
For example, type:
set interfaces dl1 unit 0 dialer-options pool denver1, where dialer 1 is also assigned
the denver1 dialer pool, and is therefore the dialer for the modem interface.
●
set interfaces dl <#> unit 0 dialer-options dial-string
<dial_string_1>
where
<#>
is the number, from 0 to 149, for the dialer,
<dial_string_1>
is the phone
number that the modem dialer can use to dial out.
For example, type:
set interfaces dl1 unit 0 dialer-options dial-string 93038885315, where dialer 1 is
assigned the phone number 93038885315 to dial out.