iContact Initial Configuration Setup
Introduction - Page 5
MultiMedia Module iContact Manual
iContact Initial Configuration Setup - Page 5
40DHB0002UKDB – Issue 2 (04/2003)
Introduction
iContact Initial Configuration Setup
Introduction
The iContact Configuration properties enable the iContact module to initiate, connect,
exchange information and communicate with other MMM complementary modules.
If you are installing and using iContact module for the first time, you are required to
setup the initial iContact Configuration properties. The configuration screen pops up by
default the first time you start iContact. You are to provide the requested information
and fill in the appropriate boxes.
Configuration Properties Menu
The Configuration Properties window provides a selection of features that assist you in
setting up the iContact module. The configuration information can be modified per
request. To view your Property settings, follow the instructions below:
1. Select
iConfig
from the Windows start menu
2. Click the tab that contains the property you wish to view
3. Enter or modify the requested information
4. Click
Save
to accept new setting values or
Close
to keep current settings
Configuration Properties
Functions
iServer
Displays location where MMM iServer is installed
Telephony
Displays current Telephony connection values
Note:
Database, iServer, and Telephony (if applicable) are required configuration
properties to setup iContact module.
iServer Property settings
The iServer settings display your current server settings. The first time you run the
program you need to provide the application with these parameters. Enter new values
or modify the current settings. The System Administrator should provide server name.
1. Enter
Default
server name.
2. Enter
Backup
server name. Leave blank, as it will be available in next release.
3. Click
Save
to update new values or continue setting up the rest of the feature
properties before saving and closing the menu.
The new server values become the current iServer values in the Configuration menu.
iServer Properties
Description
Default
Displays the computer name where the iServer is
installed.
