239
Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Testing the Complete Configuration
May 2003
Testing port network equipment
These tests verify that the Time Division Multiplexing (TDM) cables, terminators, and the
Inter-Cabinet Cables (MCC1 Media Gateway) work. If a FAIL Result code is seen, check these
cables. If problems persist, refer to the maintenance book for your configuration
.
Check port network status for each media
gateway
The port network status may suggest problem areas. Tests described later provide more specific
diagnostic information.
1
Type status port-network number <1-64> and press
Enter
.
Verify the screen displays a Port Network Status screen similar to the one in
Port Network Status Screen for Cabinet 1—S8700 Multi-Connect"
.
Verify these service states:
Sample Port Network Status Screen for Cabinet 1—S8700 Multi-Connect
Field
Service State
TDM Bus A
in
TDM Bus B
in
Tone/Clock
in
PKT
in
status port-network 1
PORT NETWORK STATUS
Major Minor Warning Carrier PN Control FIBER-
PN Alarms Alarms Alarms Locs Active Standby LINK Endpoints Mode
1 1 0 195 01A up up 1 B-PNC 01B02-03E04 standby
01B 1 A-PNC 01A01-01E04 active
TDM Service Control Dedicated TONE/ Service System System
Bus State Channel Tones CLOCK State Clock Tones
A in y n 01B in standby standby
B in n y 01A in active active
Service Major Minor Bus Open Bus
PKT State Alarms Alarms Faults Leads
1 in n n 0 0
Command:
