Avaya G450 Manager, Cli Reference Manual

Page: 1142 / 1334

CLI Commands Traffic shaping
1142 Avaya G450 CLI Reference
Example
To show the configured and allocated application memory:
G450-001(super)# show application-memory
Application Memory(KB)
Allocated Configured
---------------------------------------- ---------------------
Sniffer (capture buffer-size) 1024 1024
TFTP (ip tftp-server file-system-size) 18560 18560
---------------------------------------- ---------------------
Total used memory 19584 19584
Total free memory 896 896
Total memory (fixed) 20480
Related Commands
copy ftp phone-image , copy ftp phone-script , copy running-config startup-config , copy scp
phone-script , copy tftp phone-image , copy tftp phone-script , erase phone-image , ip tftp-server
file-system size , show ip tftp-server files , show upload phone-script-file status
Traffic shaping
interface serial
Use the
interface serial
command to enter Serial interface or sub interface configuration
mode. If the specified interface or sub interface does not exist, the system creates it and enters
its configuration mode.
Use the
no
form of the command to delete the interface. The
no
form can only be used to delete
sub L3 and sub frame relay interfaces. The command fails for USP interfaces and when higher
or lower layers are defined for that interface.
Syntax
[no] interface Serial module / if_number [ if_link_type ]
For USP interfaces
if_number
has the syntax:
port
[.
ip_interface
| {.
sub_interface
[.
ip_interface
]}]
For DS1 interfaces
if_number
has the syntax:
port
:
channel_group
[.
ip_interface
| {.
sub_interface
[.
ip_interface
]}]