16
Getting to know your handset Important information
FC1 / FC1 Ex
Putting into operation
If your handset is not yet mounted
If the handset is not completely assembled when you receive it, you must:
Insert the Mem-Card (see page 17),
Install the battery (see page 18) and
Remove the protective film from the display, if necessary.
Your service team must register the handset with your telephone system.
Your handset is then ready for operation.
Now connect the charger (see page 19).
If your handset is already completely mounted
If the handset is already completely assembled and registered with your tele-
phone system when you receive it, you need only connect the charger (see
page 19).
MEM-Card
You can only use your handset to make and receive telephone calls if a MEM-
Card has been inserted. It saves important data for your handset, such as per-
sonal settings and your personal telephone book. If you switch handsets, you
can use the MEM-Card to make and receive telephone calls immediately.
FC-1_BA_GB.book Seite 16 Montag, 1. September 2008 4:41 16
