Avaya FC1 User Manual Download Page 81

Page: 81 / 134

FC1 / FC1 Ex

The functions

Hear conversation via speaker
(Handsfree operation)

You can switch on the loudspeaker installed for handsfree operation. You can
then hear your caller’s over the speaker and you can speak with him or her.

You can achieve the best handsfree qulality id you place the handset with the
keys facing down on the table.

Switching on the loudspeaker for handsfree operation

You are speaking on the handset.

To switch on microphone: Press the R key for a

long

period.

appears in the

display.

Switching off the handsfree loudspeaker again

You are speaking on the handset. The conversation will played on the loud-
speaker for handsfree operation.

appears in the display.

To switch off the loudspeaker: press the R key for a

long

period.

NOTE

The handsfree microphone is switched off automatically once you
hang up the call.

FC-1_BA_GB.book Seite 81 Montag, 1. September 2008 4:41 16

Summary of Contents for FC1







































































































































Search results

Summary of Contents for FC1

Reviews:

Related manuals for FC1

Brands by name

Popular brands

Avaya FC1, User Manual

Search results

Summary of Contents for FC1

Reviews:

Related manuals for FC1

Brands by name

Popular brands