manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Installation Manual, Page: 23 / 96

Share
Download
Avaya Ethernet Routing Switch 8300 Installation Manual Download Page 23

Chapter 4:  Ethernet Routing Switch 8300

module fundamentals

Use this section to help understand and use each interface module. The Ethernet Routing Switch 8300

modules provide a full complement of switching capabilities.

For the minimum Ethernet Routing Switch 8300 software versions required to support the hardware

described in this document, see 

Avaya Ethernet Routing Switch 8300 Administration, NN46200-604

.

 Caution:

Do not install Ethernet Routing Switch 8300 modules and Ethernet Routing Switch 8100 or 8800/8600

modules within the same chassis. Ethernet Routing Switch 8300 Series software does not support

mixed configurations. A mixed configuration can damage the modules and void your warranty.

Navigation

•

Ethernet Routing Switch 8300 modes

 on page 23

•

Chassis slots and modules

 on page 24

•

Interface module descriptions

 on page 26

•

SF/CPU modules

 on page 43

Ethernet Routing Switch 8300 modes

The Ethernet Routing Switch 8300 has two hardware operating modes:

• non-V mode
• V mode

Non-V mode configuration requirements

The non-V mode requires the 8393 SF/CPU module.

Installation — Modules

May 2011     23

Summary of Contents for Ethernet Routing Switch 8300

































































































Reviews:

No comments