Avaya Ethernet Routing Switch 8300, Installation Manual, Page: 47 / 96

8393 SF/CPU Ethernet management port
The Ethernet management port on the 8393 SF/CPU module is an MDI 10BASE-T/100BASE-
TX port for managing the out-of-band switch by using Device Manager. You can establish a
Telnet session or use the
rlogin
command to access the CLI. Use this port to connect the
switch to a network management station. The Ethernet management port has a unique IP
address but does not switch traffic to other ports in the chassis.
This port provides out-of-band management for the 8393 SF/CPU module, and you can use it
only as a management port.
8393 SF/CPU serial port
The 8393 SF/CPU module provides a serial port for attaching console devices. The Console
port provides terminal access to the 8393 SF/CPU module to use the CLI or ACLI. For
information about pin assignments for this port, see
Technical specifications on page 77.
8393 SF/CPU Reset button
With the recessed Reset button on the 8393 SF/CPU module, you can perform a hard reset
or reboot of the system. To press the Reset button, insert a small pointed object (for example,
a paper clip) into the Reset button hole.
8393 SF/CPU PCMCIA card slot
The PCMCIA card slot in the 8393 SF/CPU module accepts the PCMCIA cards listed in Table
11: Ethernet Routing Switch 8300 PCMCIA cards on page 47. These ATA memory cards
provide a convenient way to store switch configurations and boot images. Use a memory card
to quickly transfer configurations and images between switches or to store multiple
configurations for a single switch.
Table 11: Ethernet Routing Switch 8300 PCMCIA cards
Part number Card type
DS1411021-E6 PCMCIA 64M 3.3 volt (V)
DS1411022-E6 PCMCIA 256M 3.3 V
SF/CPU modules
Installation — Modules May 2011 47