manualshive.com logo in svg

Avaya Ethernet Routing Switch 8300, Installation Manual, Page: 60 / 96

Share
Download
Avaya Ethernet Routing Switch 8300 Installation Manual Download Page 60

•

Connecting a network management station to the SF/CPU

 on page 62

•

Job aid: Required connectors and cables

 on page 64

Installing a PCMCIA card in the SF/CPU module

Install a PCMCIA card to provide file storage capacity.

1. For the 8393 or 8394 SF/CPU module, position the card with the label facing up and

the insert arrow pointing toward the card receptacle.

2. Insert the card into the card receptacle.
3. Gently push in the card until it fits snugly in place.
4. To remove a PCMCIA card, press the eject button and remove the card.

Protecting PCMCIA card files

You can write-protect the PCMCIA card so that important files are not overwritten, or remove

the protection to write files to the card.

1. Remove the memory card from the SF/CPU module.

 Electrostatic alert:

Risk of data loss

Module installation and connection

60     Installation — Modules

May 2011

Summary of Contents for Ethernet Routing Switch 8300

































































































Reviews:

No comments