Avaya EC500 User Manual Download Page 6 | Manualshive

Page: 6 / 60

background image

European Union Declarations of Conformity

Avaya Inc. declares that the equipment specified in this document
bearing the “CE” (Conformité Europeénne) mark conforms to the
European Union Radio and Telecommunications Terminal Equipment
Directive (1999/5/EC), including the Electromagnetic Compatibility
Directive (89/336/EEC) and Low Voltage Directive (73/23/EEC). This
equipment has been certified to meet CTR3 Basic Rate Interface (BRI)
and CTR4 Primary Rate Interface (PRI) and subsets thereof in CTR12
and CTR13, as applicable.

Copies of these Declarations of Conformity (DoCs) can be obtained
by contacting your local sales representative and are available on the
following Web site:

http://www.avaya.com/support/

Japan

For MCC1, SCC1, G600, and CMC1 Media Gateways:
This is a Class A product based on the standard of the Voluntary
Control Council for Interference by Information Technology
Equipment (VCCI). If this equipment is used in a domestic
environment, radio disturbance may occur, in which case, the user may
be required to take corrective actions.

For the G700 Media Gateway:
This is a Class B product based on the standard of the Voluntary
Control Council for Interference by Information Technology
Equipment (VCCI). If this equipment is used in a domestic
environment, radio disturbance may occur, in which case, the user may
be required to take corrective actions.

To order copies of this and other documents:

Call:

Avaya Publications Center

Voice 1.800.457.1235 or 1.207.866.6701

FAX 1.800.457.1764 or 1.207.626.7269

Write:

Globalware Solutions
200 Ward Hill Avenue
Haverhill, MA 01835 USA
Attention: Avaya Account Management

E-mail:

[email protected]

For the most current versions of documentation, go to the Avaya Web
site:

http://www.avaya.com/support/

«
...
4
5
6
7
8
...
»

Summary of Contents for EC500





























































Reviews:

No comments

Related manuals for EC500

Brand: Panasonic Pages: 92

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 8

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 56

Brand: Jumbo Pages: 4

Brand: Uniden Pages: 55

Brand: Walker Ameriphone Pages: 39

900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting...

Brand: Radio Shack Pages: 24

Brand: Krown Pages: 20

Brand: Cobra Pages: 25

Brand: Avvio Pages: 64

Brand: Philips Pages: 2

Brand: Philips Pages: 44

Brand: Philips Pages: 50

Brand: Philips Pages: 94

Brand: Pantech Pages: 56

Brand: JOIWO Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands