Avaya

EC500, User Manual

Page: 37 / 60

Changing your station security code
Issue 4 May 2003
37
Changing your station security code
Use the following procedures to change your station security code.
Changing the station security code from
your office telephone network
1. Dial the EC500 security feature access code provided by your system
administrator.
You hear a dial tone.
2. If you are performing this procedure from an extension other than your
office phone, enter your office phone’s extension number.
If you are performing this procedure from your office phone, or from your
EC500 cell phone which sends office caller ID, skip this step and go to Step
3.
3. Press # on your telephone keypad.
4. Enter your current station security code.
5. Press # on your telephone keypad.
6. Enter a new station security code.
Your station security code can be 1-4 digits. Valid values are #, *, 0-9 for
the initial digit; 0-9 for subsequent digits.
7. Press # on your telephone keypad.
You hear a confirmation tone indicating your security code has been
changed.
8. Hang up to end the call.
NOTE:
If you do not receive a confirmation tone, hang up, verify the codes entered
and repeat this procedure from Step 1. If you still do not receive a
confirmation tone, contact your system administrator for assistance.